Novamatic FH69-VCU2 Manual de usuario descargar pdf (Pagina 15)

You can use Duration and End

at the same time if you want

the appliance to activate and

deactivate automatically: first

set the Duration and then the

End.

Setting the clock functions

For Duration (dur) and End (End), set an

oven function and temperature of cooking.

This is not necessary for the Minute

Minder .

1. Press again and again until the

indicator for the necessary clock

function starts to flash.

2. Press

or to set the necessary

clock function.

The clock function activates. The display

shows the indicator for the clock function

you set. For End and Duration symbol A

also comes on the display.

3. When the time ends the indicator of

the clock function flashes and an

acoustic signal sounds for 7 minutes.

Press any button to stop the signal.

With the Duration and End

functions, the appliance

deactivates automatically.

Cancelling the clock functions

1. Press the again and again until the

necessary function indicator flashes.

2. Press and hold and buttons at

the same time.

The clock function goes out after some

seconds.

Changing the acoustic signal

1. To hear the current acoustic signal,

press and hold the button.

2. Repeatedly press to change the

signal.

3. Release the button.

The last tone you set is the new acoustic

signal.

4. Wait 5 seconds for the setting to be

confirmed automatically.

When the appliance is

disconnected from the mains or

after a power cut, the signal

tone is set back to the default

one.

OVEN - USING THE ACCESSORIES

WARNING! Refer to Safety

chapters.

Inserting the accessories

Wire shelf:

Put the shelf between the guide bars of

the shelf support.

Tray:

Do not push the baking tray all

the way to the back wall of the

cavity. This prevents the heat

from circulating around the

tray. The food may be burnt,

especially in the rear part of the

tray.

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comentarios a estos manuales

Sin comentarios