Novamatic FH69-412K2 Manual de usuario descargar pdf (Pagina 8)

1. Install the anti-tilt protection 317 - 322

mm down from the top surface of the

appliance and 80 - 85 mm from the

side of the appliance into the circular

hole on a bracket. Screw it into the

solid material or use applicable

reinforcement (wall).

80-85

mm

317-322

mm

2. You can find the hole on the left side at

the back of the appliance. Lift the front

of the appliance and put it in the

middle of the space between the

cupboards. If the space between the

bench cupboards is larger than the

width of the appliance, you must adjust

the side measurement to centre the

appliance.

If you changed the dimensions

of the cooker, you must align

the non-tip device correctly.

CAUTION! If the space

between the bench cupboards

is larger than the width of the

appliance, you must adjust the

side measurement to the

centre of the appliance.

Electrical installation

WARNING! The manufacturer

is not responsible if you do not

follow the safety precautions

from Safety chapters.

This appliance is supplied without a main

plug or a main cable.

WARNING! Before you

connect the mains cable to the

terminal, measure the voltage

between phases in the house

network. Then, refer to the

connection label at the back of

the appliance to use the correct

electrical installation. This order

of steps prevents from

installation errors and damage

to the electrical components of

the appliance.

Applicable types of cables for different

phases:

Phase Min. size cable

1 3x6.0 mm²

3 with neutral 5x1.5 mm²

WARNING! The power cable

must not touch the part of the

appliance shaded in the

illustration.

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comentarios a estos manuales

Sin comentarios